Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

  • Best Of...
  • Groups
  • Thank you so much for your involvement with the Owner's Club Forum! We hope you've gotten some great information and had the chance to interact with other owners on the current system.

    We are excited to announce that a full Forum system upgrade is under way, which will make it even easier to get answers to your questions, help other owners by using your boating experience, and receive dependable advice from our network of experts. While things may look and operate a little differently, we believe the new system will ultimately improve your Forum Member experience.

    We are doing everything we can to transition your account smoothly without you having to change your current login, username or password. You should be able to get into your account exactly the same way once the transition takes place. However, if you have any questions or comments, please leave a comment in the General Discussions category.

    We look forward to sharing new features with you as we upgrade and improve your Owner's Club Forum experience!

    Accuracy of Fuel Gauge

    MacklinMacklin Member Posts: 12
    '07 GS211 - how far down on the gauge can I go before running to the ramp to put her up for the winter? Ethanol is bad stuff and you want as little of it as possible to sit for more than a few weeks. I will probably suck out what is left and burn in my cars. But curious about the gauge just for general knowledge. I have not gone below 3/8 on mine.

    Comments

    • Ernest TErnest T Member, Moderator Posts: 268 ✭✭✭
      It depends a lot on the shape of your fuel tank. On many boats the fuel tank is a wedge shape with the point of the wedge pointed down toward the keel of the boat. This makes it easier to fit in the tank. Other tanks have weird shapes depending on how they fit into the hull. What I've found on my boat is that the fuel gauge moves very slowly at first as the fuel level changes very little as fuel is removed from the widest top part of the tank. As the level drops the tank gets narrower and the gauge drops more quickly. The bottom line is that when my tanks gets to the 1/2 way point on the gauge, I really have much less than 1/2 a tank of fuel left. In fact, when my gauge shows 1/2 tank, I really have closer to 1/4 of the actual amount of fuel in a full tank. If my tank gets to the 1/4 mark, then I had better be very close to a fuel pump. I typically refuel at the 1/2 tank mark just to be safe.
      2010 Hurricane 2100 (217) Sun Deck
      2008 Yamaha F150 TXR Outboard
      2008 Yamaha FX **** Cruiser Waverunner
    • donmatdonmat Member Posts: 41 ✭✭
      I fill my tank almost full and add startron fuel treatment. I have done this several years now with ethanol fuel and have never had a problem with water in the gas. In fact, when I change my fuel / water separator filter each year, there is no water in it. Just a thought as an alternate. Just make sure you use the additive which I add with each fuel fillup all summer.
    • cjjjdeckcjjjdeck Northern NJMember, Moderator Posts: 1,254 ✭✭✭✭
      I second Donmat's comment.  I've been using Startron for a number of years as well with no fuel problems (especially after winter storage).  I also use this additive for ALL my small engine driven devices/toys (snow blower, lawn mower, pressure washer, generator etc.).  I know some people that use Valvtect Marine fuel additive and have had the same results.
      2012 SD237 I/O Mercruiser 5.0L MPI ECT/ Bravo 3
      2012 Load Rite Elite Tandem axle trailer

    • FlyingV5FlyingV5 Member Posts: 154 ✭✭✭
      Don't use ethanol. Evil swill. Marinas sell straight petroleum gas and stations near the water sometimes do too.
    Sign In or Register to comment.